-
Hello,
I have a MPTS stream (or alternatively a SPTS stream) and I want to replace a single PID with a different content.
I am using this method:
```
tsp --synchronous-log --timed-log \
…
-
**Describe the bug**
Alternator PID Output stays at a high value after we're past the target voltage for a while, eventually starts lowering
**Hardware**
- Board: [4chan revI]
- Engine info [M…
-
Verbatim from Grayskull user:
"NVIDIA SMI tells you which PID is using their driver and % utilization; TT-SMI is nice looking but I don't get much information from it. I want to know which PIDs are…
-
Hi,
I have multicam server 4x dual cams tbs 6950. Mostly on HD channel is see errors in log PID Continuity error. At this time channel freeze (graphs also confirm some problem). SD channels from same…
-
Hello! I tried:
`./loq toggle
`and got:
```
cat: /home/username/.loq/tmp/recording_pid: No such file or directory
kill: usage: kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -…
-
After #1465 we may want to remove PID condition from the configuration and instead have two dedicated instances of PID filter
-
Currently, the PID for the driving is:
P = 0.6
I = 0.0
D = 0.05
Our turning is good, but driving is not yet perfect. It jitters constantly, and it moves after we stop the robot. Because the cod…
-
Currently we have only one VID/PID for all Apollo platforms. We use `bcdDevice` to indicate Cynthion hardware revision, but we also overload `bcdDevice` with board identification. There are some probl…
-
Hello
I use the pid to filter a temperature and wich a the first iteration to start with initial value.
Is it possible to set the PID so that the first iteration is not zero but the initial value?
…
ewok2 updated
4 weeks ago
-
# Problem
discrete한 상황에서 어떻게 PID controller를 코딩해야 하는 지 몰랐음
![image](https://github.com/Giromi/Capstone1/assets/60354633/effeb1c0-a06a-4150-b844-e910635a58c0)
I, D제어기 코드 이상