-
### Version
2.2.0+linux-x64 (AppImage)
### Operating system type + version
Arch Linux
### 3D printer brand / version + firmware version (if known)
Prusa i3 MK2
### Behavior
Slicing the mo…
-
### What happened?
I have been using v2.4.58.5.
I used the program a week ago, and it worked just fine. Recently the program has been failing to launch. When I launch it, the program hangs and is un…
-
### Description of the bug
With HueForge becoming popular, I'm using the Preview tool to look at the different colors on the layers. When right clicking on the slider to change the filament color, t…
-
I'm using the following command line on Windows 10:
`"C:\Program Files\Cura 2.4\CuraEngine.exe" slice -j "c:\Program Files\Cura 2.4\resources\definitions\prusa_i3_mk2.def.json" -l Marvin.stl -o Marvi…
-
The guide speak about a mk3 config file but I can't find one to download. I have a MK2s but I hope to get this file as a starting point to configure klipper
-
#### What were you doing?
I am uploading files via samba to the raspberry pi. Everything works fine while not printing
#### What did you expect to happen?
The file to be uploaded as usual
#### What …
-
This might fall under wish list. But it irks me. I would like to perform the pulse to at least what it says on the web site. the most egregious short coming is the advertised E3D V6 upgrade. where it …
-
The fine people over at @prusa3d wrote a tuned estimator for the Prusa i3 MK2/3 for their fork of Slic3r.
Looking it over, it appears as such that it would not be difficult to port it back to upstr…
-
The rambo-base.stl in the MK2.5 branch (and in the STL package from the prusa website) is marked "R1", while the downloadable gcodes are "R2". Might it be that the gcodes are made from a local branch …
-
Hello,
Thank you for creating & sharing this! I generated a calibration gcode file for the Prusa MK3.5 and it appears to be incrementing the M900 K values. The default MK3.5 printer & PETG filame…