-
Hi,i have new stepper driver dvr8825 but if i engrave 40x40mm size final product is cca 20x20mm
If use stepper driver A4988 engraved size is ok.Please how to set DVR8825?
Thank you.
-
Stepper motor driver ULN2003 in simulation.
-
I have encountered a problem, I use the latest marlin firmware and 5160 is OK on my motherboard. The configuration is not changed, only the drive is changed to 5161, and the information displayed usin…
-
- I've installed the Git
- I've added the Update Code to Moonraker
- I've added the missing hold_current to the tmc_5160 stepper_x/y sections together with the motor_constants and autotune_tmc Code …
-
What you have done is impressive with the integrated closed loop circut - but the A4950 is older and antiquated. What about the TMC4671 - ? Or other even two options with the TMC5160 & TMC2209?
-
At the time of writing, some of the stepper motors don't seem to be able to support the weight of the arm. This might be due to the fact that we are not providing enough current to the motors by setti…
-
First of all, thank you for creating this library and all the documentation in the `README.md`. This was extremely helpful in getting the driver working.
Right now, I am only able to control my ste…
-
Is there a way with the new photon s motherboard to bypass the A4988 integrated stepper ##driver? I mean something like [this video shows.](https://www.youtube.com/watch?v=SvyMA_eFx1Y) about the old …
-
### Did you test the latest `bugfix-2.1.x` code?
No, but I will test it now!
### Bug Description
I have had Marlin 2.1.2.4 working on my printer fine with A4988 drivers , but just replaced the step…
-
I've been working with the TMC2209 and other Trinamic drivers for over 6 years, and have written a guide to help get everyone started as quickly as possible, because these drivers and library are very…