-
Investigate availability of drivers on the STM32F3-Discovery and Olinuxino card respectively.
-
It seems that the GPIO peripheral is largely the same for all but the STM32F1 family. Still, macros that seem to refer to the exact same thing are named inconsistently, e.g.:
- `GPIO_OSPEEDER_OSPEE…
-
Dear Experts,
I am working on Discovery repository, I am building this for STM32F3 Discovery. I am facing following error
**linking with rust-lld failed: exit code: 1**
When I am building by
…
-
**Is your enhancement proposal related to a problem? Please describe.**
When defining board revisions using letters, only capital letters could be used to define revisions (for instance `stm32f3_disc…
-
I needed opamps in STM32F303, so here's my library files to configure them:
Files are in this repo: https://github.com/MightyPork/libopencm3_stm32f3_opamp
May work for other F3 models, this is the o…
-
Patch:
[0001-stm32-Fix-DFU-serial-number-generation.patch.gz](https://github.com/libopencm3/libopencm3/files/847111/0001-stm32-Fix-DFU-serial-number-generation.patch.gz)
Tested on STM32F2, STM32F3…
-
Subsystems should be left out of the build based on which HAL components are enabled by the platform's `halconf.h`. Given our platforms span at least the STM32F3 and F4, the firmware will fail to comp…
-
Can not understand where the patch needs to be. Tried different versions with no success. Can you help?
-
This gives an overview of STM32 MCUs for which RIOT has at least basic support.
As ST releases new Chips we are not always up to date with the changes needed to support them, but they typically shar…
-
As of 2023-12-28, the STM32 driver for I2Cv1 (STM32F1, STM32F2, STM32F4, STM32L1) leans heavily on interrupts, as this is how i2cv1 was designed to be used. In multiple places, there's a process that …