-
[Uploading STM32F1xx-master.zip…]()
I have a BTT SKR MINI E3 V2.0 board, which I want to use with grblHAL. Therefore I uncomment ```#define BOARD_BTT_SKR_MINI_E3_V20``` in ```my_machine.h```. The c…
-
Hello,
I'm currently trying to drive a stepper motor which drives a linear stage to move something around. I have a fysetc v3.0 TMC2209 connected to a CNC shield v3 which sits on an arduino mega 25…
-
I'm attempting to use BigTreeTech's TMC5160 breakout board via SPI for controlling a 2.0A NEMA bi-polar stepper, in the interest of integrating the Trinamic StallGuard capability into my project. The …
-
Hi, I want to use Stallguard and a Library to run the stepper such as Accelstepper Library. I've combined Stallguard example and Accelstepper example. Stepper is running but output is:
> 0 0 55
0…
-
Any word of advice on interfacing trinamic drivers on board instead of the a4954 stepper drivers? This so stepper operation can be quieter.
-
First of, thanks for the amazing work with this library!
I'm trying to get StallGuard to work with a TMC5161 from BGT (this one: https://raw.githubusercontent.com/bigtreetech/BIGTREETECH-TMC5161-V1.0…
totum updated
4 years ago
-
Tried to use this with LDO 2504AH on Octopus v1.1 with TMC2209(s) and senseless homing doesn't appear to be working even with a value of 255 the X Axis is crashing into the gantry.
I add `2504ah` t…
-
I've spent hours working with FLSUN to fix the firmware for my custom QQ-S Pro with an MKS Robin Nano V3.1 and a TS35 V2.0.
I have the Homing fixed except, if I offset any axis by a small amount ma…
-
One of the Y axis moves slower than the other causing issues during prints. I have no clue where to go from here.
`/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https:…
-
**Right Now I have use your X-scara firmware.I know how to set INVERT my motor but I confuse what is the correct direction.I test on Pronterface and Repetier-Host.My Question is**
![move_in_position]…