-
Step 12 of 'Disassemble and debug...' states
```
Notice that some capabilities are labeled with (sentry)
```
but I only see entries labeled `(sealed)` in the register file:
```
(gdb) info …
-
Is it possible to somehow read a DHT11 with an ATMEGA328P running at 1 MHz? The reason the CPU is running so slow is because this is a battery operated project, thus I am trying to bring down current …
-
In wiring.c delayMicroseconds() function using SBIW and BNRE instructions for timing.
In AVR MCUs it takes usually 4 clock cycles while in LGT MCUs takes usually 3 clock cycles.
Therefore this funct…
-
I'm trying to execute stall guard example on esp32, the simple example is running fine but there are errors with stallguard. Please help
`Arduino: 1.8.5 (Windows 10), Board: "MH ET LIVE ESP32MiniKi…
-
Hello,
I have a problem making the StallGuard feature of the TMC2130 to work with my Arduino UNO. I was able to get the stepper motor working, but I wasn't able to read the updates through the SG_R…
-
Wazuh version - 3.12.3-1
I get trouble while writing decoder for Kaspersky CEF logs.
Here is the example:
Example log:
`CEF:0|KasperskyLab|SecurityCenter|11.0.0.1131|GNRL_EV_VIRUS_FOUND_AND_BL…
-
I have created a simple program for creating four PWM outputs using timers 1 and 2. Any PWM output assignments made to TOCC0-3 result in constant HIGH state on the pins. Assigning them to TOCC4-7 work…
-
If step time is longer than 65536 ticks, the actual step time is not tick accurate. The longer the step time the less accurate it gets. This is because the step time is approximated using a period tim…
-
A pair of students are getting this error when they try to load their HW3 file. The project is saved on Courtney's account.
Usernames:
courtneyrae23
allanazarenko
Project name:
HW3 Progress
Picture…
-
the link [download.visualstudio.microsoft.com](http://download.visualstudio.microsoft.…