-
I'm trying to use `openFPGALoader` with an [Arrow DECA](https://www.arrow.com/en/products/deca/arrow-development-tools) development board. Its product page claims it has a USB-Blaster II included, so …
-
Programming the RISCV example into the FPGA does not do anything. The LED doesn't blink and the UART doesn't send. I investigated this three months ago and determined that Lattice incorrectly routed t…
-
I just got my Caribou Lite (6GHZ R2.8) from mouser. I am having issues getting it working. I just want to verify that there should be no components soldered in the "MXR IN" box on the top of the uni…
-
I am learning really well through the project wiki. Thank you so much.
However, I have some questions that are not solved.
When a module is extracted from the Phantom 4 Pro (wm331) firmware, 21 …
-
Based upon [findings related to this not yet solved bug](https://github.com/machinekit/machinekit-hal/issues/235#issuecomment-536143111)
I yesterday took a look into the [newest mesa hdl sources](htt…
-
I'm using (64-bit) RocketChip as part of the LiteX SoC environment, which provides DRAM controllers of varying AXI port width, depending on the specifics of individual FPGA boards it's being built for…
-
So, this is a pretty big challenge I think....
The iCE40 1K has the following resources;
* 1280 Logic Cells
* 64kbits Embedded RAM bits
* 1 PLL
However, there might be hope, your stats …
-
observed running [irqtest.hal](https://github.com/machinekit/machinekit/blob/master/configs/hm2-soc-stepper/irqtest.hal), on terasic de0, times are in nS:
```
halcmd: show funct
Exported Functions:
…
-
TL;DR: Multi-Core System does not boot Linux. Framebuffer makes everything worse
Hello! I have the goal to build a quad-core RISC-V system that I load
onto an ULX3S Board (ECP-85F). In the long te…
-
Good Morning,
I am a student of the University of Bologna, currently enrolled in the Computer science master degree, and I am currently working to my master thesis.
We would like to replicate th…
mngr0 updated
3 years ago