-
Hi,
I followed this tutorial:
https://docs.platformio.org/en/latest/tutorials/espressif32/arduino_debugging_unit_testing.html#tutorial-espressif32-arduino-debugging-unit-testing
I had to ma…
-
I have a bunch of fake ftdi chips that all have the same manu/product/serial info, When I used pyftdi's methods of listing devices by vendor id I only list one of the adapters if I have multiple conne…
-
I had some success using Debug with verilator, now I switched to FPGA (iCE40-HX8K) and a JLink JTAG probe. I am using the project [iCE40-hx8k_breakout_board](https://github.com/SpinalHDL/VexRiscv/tre…
-
when generating an `icetime` rpt file like this:
```
icetime -d hx8k -P tq144 -p syn/myfile.pcf -mtr myfile.rpt myfile.asc
```
`icetime` returns an error: `No path found!`; The `myfile.asc` fr…
-
-
I'm looking to use the FT232H with the Bosch BNO055 I2c orientation sensor, which requires clock stretching to operate. #91 mentions that clock stretching is not currently supported and as I understan…
-
Greetings folks, I would like to make a suggestion. I can turn this into a PR if there is interest.
The FT2232H has as regulated 1.8V output. VCCIO2 provides a jumper for supplying a different IO v…
-
Hi, I've been using two FT232s thru android OTG (with hub) with your code to connect to some dedicated hardware (NMEA on port1 and my own hardware on port2) - it's working great. However I want to u…
-
Hello!
I'm trying to program the EEPROM. I have been stuck in this step.
```
$ sudo python3 ovctl.py -p ov3.fwpkg eep-program 10000
FPGA not loaded, forcing reload
FPGA: Bitstream timestamp 2014/…
-
To start on this, we need a complete list of differences between the octo and the Venus GX.
Besides testing power supply and various I/O, the tester software also writes the serial numbers, wifi WP…