-
## Do not report new issues related to this message, instead please comment on this issue with the logs that you see and the config for that component.
### The problem
```
[00:00:00][W][compone…
-
firmware file name: [v1.19.1-782-g699477d12 (2022-12-20) .uf2](https://micropython.org/resources/firmware/W5500_EVB_PICO-20221220-unstable-v1.19.1-782-g699477d12.uf2)
Board: https://micropython.org/d…
-
Hello,
I ve use your template to create my own interface for my NSpanel. Thank you for sharing your project.
I just have one problem : I don't understand this part:
```
- platform: nextion
…
-
```
sloeuillet@Domicile:~/Marvell_Raid$ uname -a
Linux Domicile 3.16.0-26-generic #34-Ubuntu SMP Wed Nov 26 15:58:47 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
sloeuillet@Domicile:~/Marvell_Raid$ lspci …
-
**Right Now I have use your X-scara firmware.I know how to set INVERT my motor but I confuse what is the correct direction.I test on Pronterface and Repetier-Host.My Question is**
![move_in_position]…
-
Hi . I wired everything like shown up but get TMC Connection Error in Display. Checked via Pronter 3 TMC2008 get a Connection But the 4. Has bad Response All to low. Can sw Help pls . I used BT…
-
# Bug report
I'm trying to flash my lanzi TC001 Smart Pixel Uhr 2882 via https://blueforcer.github.io/awtrix-light/#/flasher.
This error occures:
![grafik](https://github.com/Blueforcer/awtrix…
-
Hi,
I have this running to control three fans on my inverter. Soon I will expand to cover a second inverter with a second set of fans (once I move out of breadboard stage). You made it so super eas…
-
One of the Y axis moves slower than the other causing issues during prints. I have no clue where to go from here.
`/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https:…
-
all three marlin tango revisions seem to be the same 1.1.8 and seem to be setup for a delta.. i'm fairly new to marlin, and i am trying to get my new board running on a cartesian, and currently i am g…