-
Hello,
After a lot of struggle, I got Klipper up and running, but none of the fans are working.
I have FAN0 (cooling parts) and FAN1 (heatsink) connected, and also FAN6 for controller-board cool…
-
### Checklist
- [X] I have filled out the template to the best of my ability.
- [X] This only contains 1 feature request (if you have multiple feature requests, open one feature request for each feat…
-
Having issue with Bltouch on newly installed EBB SB2209 RP2040 on manta m8p canbus. I'm able to manually pin up and pin down. but wont sense pin up doing touch mode. everything else works on the eb…
-
Because the SD card slot on the [microzed PCB](https://github.com/HaddingtonDynamics/Dexter/wiki/MicroZed) is on the back side, and the stepper motor drivers on the motor board are right behind it, in…
-
I upgraded from E3 mini V1.2 to V2.0 in my Ender 3 after the part cooling fan mosfet burnt. I really like the v1.2 as it worked well and was very very quite.
After installing the V2.0 board I am h…
RS231 updated
3 years ago
-
Not all labels are tied to their respective input elements, meaning that clicking the label does not focus the input, and as a side effect, does not show the appropriate help text in the side bar.
no…
JL102 updated
2 years ago
-
**Is your feature request related to a problem? Please describe.**
Když mi běží poslední tisk, tak po dotisknutí mi tiskárna vychladne a filament mi zůstane uvnitř, a ten musím pak buď ustřihnout, an…
-
Implement library and control to change fan speeds and servo motors by means of controlling I2C PWM controller (OutputControl Object).
-
Hello,
I'm Eugenio Bertolini, a big fan of your works with Lightining Pose (LP) and EKS. Thank you so much for this incredible tool.
In the LP paper you were mentioning that the unsupervised losse…
-
The only thing that's there so far is the holes for mounting to the lower and upper support brackets. This photo indicates the additional holes required: https://plus.google.com/u/0/photos/110997713…