-
## Expected Behavior
`configure.py --lock-device`
info: Device is now locked down!
## Actual Behavior
`configure.py --certificate=crypto_data/opensk_cert.pem --private-key=crypto_data/opensk.key…
gtf35 updated
4 months ago
-
I'm using espflash master to flash a esp-idf-* (master) project with espflash to a esp32c6.
```
espflash flash --monitor
[2024-01-22T08:43:49Z INFO ] Serial port: '/dev/ttyACM0'
[2024-01-22T08:…
t-moe updated
3 weeks ago
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
I want to test the project on a ZedBoard. How can work if the JTAG signals are all 0? where is defined DMIDirectTAP? How can I modify the code making JTAG external?
-
### Golioth Firmware SDK Commit Hash
ec34837aad01b55ba6f961291bbd96d841956eee
### Platform/OS
ESP IDF Release v5
WSL and Windows with [VisualGDB](https://visualgdb.com/);
Visual Studi…
-
Hi, the PIC32 is fully JTAG programmable as well, and is even supported with OpenOCD.
Are the JTAG pins exposed on this device? Are there any other limitations that would make JTAG programming imposs…
-
i have trouble using the hardware JTAG interface over the Raspberry Pi Debug HAT after the system is fully booted: the JTAG programmer reports
> TDO seems to be stuck at 1
i think the GPIO/retro…
-
Hello!
There is a Pluto+ Rev2 on hand. When programming any firmware (official AD or pluto+ firmware) via JTAG with the DLC10 programmer in Vivado 2020.2 the following errors occur: ERROR: [Labtools…
-
I've spent a rather confusing couple of hours trying to diagnose behaviour that I'm seeing in OpenTitan. There, we have a [frontdoor agent](https://github.com/lowRISC/opentitan/blob/master/hw/dv/sv/jt…
-
References:
https://github.com/OpenIPC/firmware/issues/993#issuecomment-2059540801 (by @csvke)
This is tracking the effort to support the IF-SD-WIFI board support. Currently it carries an Altobe…