-
Herr Hess moechte die Laser mit dem Coherent-Programm ueber einen separaten Wrapper ansteuern, ohne etwas umstecken zu muessen
Issued by [Martin Hess](mailto://alexander.funk@creavac.de ':ignore')
-
Herr Hess moechte die Laser mit dem Coherent-Programm ueber einen separaten Wrapper ansteuern, ohne etwas umstecken zu muessen
Issued by [Martin Hess](mailto://alexander.funk@creavac.de ':ignore')
-
Herr Hess moechte die Laser mit dem Coherent-Programm ueber einen separaten Wrapper ansteuern, ohne etwas umstecken zu muessen
Issued by [Martin Hess](mailto://alexander.funk@creavac.de ':ignore')
-
Hello. I am facing a problem - I have a laser (LS-40W-F23) which is controlled by TTL signal.
One of the options I have seen is to solder to the FAN1 pin going to the fan control mosfet, and by sett…
-
I'm using https://github.com/InstituteforDiseaseModeling/laser/commit/f598b877f2b20694a3aaa60ef6bd3a7171eab047 and `run_laser_with_sf.py`. Currently getting error:
```
Traceback (most recent call la…
-
Good afternoon,
I'm trying using 2 laser (LMS500 and LMS4000) in the same process.
I see that the first works but the second doesn't work correctly (the init is ok but the callback doesn't receiv…
-
The plane wave laser has a parameter called "ramp_init", in the laser.param comments it is referenced as "laser_init", which it says is twice the time of the time the laser is initialized before/after…
-
![1](https://github.com/Warwick-Plasma/epoch/assets/141721838/ccc91819-fee5-4e4d-8a29-4ec2ca9d15ff)
Dear teacher:
Hello, in the first picture of ey electric field diagram in m…
-
### Is your feature request related to a problem? Please describe.
I am always toggling my lasers off, either on spawn or after using dev tools. While this wouldn't help with the second part would b…
-
- [ ] Fare lista componenti
- [ ] Creazione documenti tool
- [x] Creare possibilità di report stand alone e comune con altri tool
- [x] effettuare test report not stand alone
- [ ] Verificare salv…