-
To send files to either 3D software or Lasercutter it would be good to be able to export to DXF. Converting to DXF from other formats is impossible as DXF is the only format that I am aware of that sa…
-
I would like to use Visicut with a laser plotter connected via IP, as described in: [http://lasergrbl.com/en/usage/wifi-with-esp8266/](http://lasergrbl.com/en/usage/wifi-with-esp8266/)
Procedure:
…
-
hi,
I'm using marlinkimbra to control a lasercutter since my controller (mpc6515) has broken.
The laser tube is a 80w c02. dimensions are 1380 x 880 mm.
I can generate a gcode using inkscape and th…
-
Aus Podio:
Der aktuelle Stand der Software ist da noch sehr einfach gehalten, weil das noch gar nicht spezifiziert ist. Deswegen mache ich einfach HTTP Request mit der Karten-UID und bei einer Antw…
euphi updated
6 years ago
-
Hi!
With the lasercutter, in the Fablab, we cut almost always Wood or PMMA, studying ways to join parts, create puzzles and coupling.
But the paper strips, in my opinion, are sufficiently thin t…
-
Bitmap marking moves may be faster than the normal engraving moves,
as usually only one axis is involved, and this axis is faster than the other axis.
Now the speed is calculated relative to the axis…
-
**[ UUID ]** 0a3a543e-4c67-4662-9e4f-d2d2c26a52c6
**[ Session Name ]** Inkscape and Lasercutting - come make some jewellery or a keyring.
**[ Primary Space ]** Youth Zone
**[ Secondary Space ]** Open…
-
Currently there are 4 separate settings dialogs:
- Mappings
- Laserprofiles
- Lasercutters
- Materials
Accessing them trough a submenu of the main menu is slightly oncomfortabel and it's hard to bro…
-
We'd like to make a smaller housing for the centrifuge that is designed to keep all the inner parts exactly in place in a minimal volume.
The current version is build with both 3D printed parts and l…
-
Hi, I am the author of VisiCut. It looks like we are doing a lot of duplicate work. Would you consider writing a VisiCut driver for Marlin? Please have a look at my Grbl and Smoothieboard drivers (htt…