-
The STM32 MCUs support half-duplex SPI, which is needed to talk to some peripherals like the [LSM303](http://www.st.com/en/mems-and-sensors/lsm303c.html) magnetometer/accelerometer. It would be great …
-
Hi Kris,
I am currently going through the process of attempting to change what i think is necessary to use an AltIMU 10 V5 sensor instead of the MPU9250 and MPU9150. I was forced to use the AltIMU se…
-
Дмитрий, у вас на схеме подключения вместо IMU-сенсора, нарисован «Расширитель GPIO-портов».
-
bonjour voici une liste avec les derniers ships intégrés.
```
case 0x00: Serial.print(F("AS3935")); break;
case 0x01: Serial.print(F("AS3935")); break;
case 0x02: Serial.print(F("AS3935")); break;…
-
你好,首先非常感谢开源这么棒的项目,我近期复刻过程中遇到几个问题,万望解答:
1.手工焊接的磁场传感器LIS3MDL焊坏了,没有这个芯片可以测速吗?
2.主菜单选择开始,提示失败音,是因为没有插内存卡吗?
-
I was trying to test #127 locally and it deleted the whole git repo where I was working. Nothing was lost as I didn't have any un-pushed work, but, OUCH.
I'm guessing it was because one step was `…
-
Hi @PaulZC ,
I have been using the global tracker quite a bit (not for balloons, but other applications), and suggesting these to several people around me. I think everybody is very happy about it …
-
I noticed that my pixhawk v2 was having some problems, so I hooked up the console in telem 4/5.
What I see at random are different problems:
* Memory problems: this warning comes out "WARNING …
-
This is a list of issues discovered during Copter-4.0 testing:
Common support problems:
- [ ] users can't figure out which barometer is being used ([discussion](https://discuss.ardupilot.org/t/e…
-
Hello, I am trying this code for the MPU9250 and I am able to obtain the pitch and roll orientations, but I am not able to read the magnetometer for the yaw estimation. This is what I get when runnin…