-
Multiple issues with MKS Eagle board:
1. We tried to use the Marlin from the following sources:
1. https://github.com/makerbase-mks/Mks-Robin-Nano-Marlin2.0-Firmware
2. Original Marlin 2.0 and al…
-
Multiple issues with MKS Eagle board:
1. We tried to use the Marlin from the following sources:
1. https://github.com/makerbase-mks/Mks-Robin-Nano-Marlin2.0-Firmware
2. Original Marlin 2.0 and al…
-
Hello. At the moment there is a bootloader problem for the new board version v3.1. People who wanted to put RRF on their board, according to the instructions, flashed the bootloader. After flashing, t…
-
STM32F103 / STM32F407 boards BOOT0 pin should have *jumper* (or button) to VDD 3v3, and the pin should be resistor to GND. can use like 1k, 4.7k etc. or can jumper both sides 3V3, BOOT0, GND, so norma…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Since version 2.1.2.3 I can no longer read or start printing via cura. I'm using a mks …
-
Hi,
i have flashed ESP3D to my MKS WIFI
(Firmware: https://github.com/makerbase-mks/Mks-Robin-Nano-Marlin2.0-Firmware.git)
NANO V3 / TS35
#define MOTHERBOARD BOARD_MKS_ROBIN_NANO_V3
#define …
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I bought a new mainboard for my printer and compiling firmware for it:
```
#define SDSUPPOR…
l-e-s updated
6 months ago
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
![PXL_20240402_192257867](https://github.com/makerbase-mks/Mks-Robin-Nano-Marlin2.0-Firmware/…
-
I've got a Koonovo Elf (Same as Creativity Elf), with no modifications. I want to upgrade all stepper drivers to TMC2208 in UART mode, as well as add a bltouch. I've found a document here: https://www…
-
Hi,
i have flashed ESP3D to my MKS WIFI
(Firmware: https://github.com/makerbase-mks/Mks-Robin-Nano-Marlin2.0-Firmware.git)
NANO V3 / TS35
#define MOTHERBOARD BOARD_MKS_ROBIN_NANO_V3
#define …