-
I've been trying to get the M8M GPS to work with this driver without any success so far. I always get the what() error when launching, and I'm not sure if there's something I haven't configured right …
-
### Feature request
**Summary:**
I would like to add support for magnetic angle position sensors using the I2C input. These would be used in vane type instruments to determine angle of attack (AoA) …
MacBr updated
8 months ago
-
Hello, I am trying to use a distance sensor as altimeter.
I am running 1.13.2 firmware version, and I have followed the instruction reported on [lidar_lite page](https://docs.px4.io/v1.13/en/sensor/l…
-
Hi acredsfan,
Having been working on a prototype autonomous robotic lawnmower myself, I thought that I might offer some observations and advice based on what I have learned working on my prototype.
…
TCIII updated
4 months ago
-
The PX4 airspeed sensor breakout is using a 5V sensor for a 3.3V bus, which is _not_ compliant with the I2C spec and leads to _thousands_ of read errors in a short time frame. It can be fixed in two w…
-
Hello devs, thank you for your work.
Ive been using an old version of your filter (uNavINS) in arduino for a while and i just want to start using this version of the code. The problem I have is tha…
-
Need to write a library to interface the RP2040 with the MAX-M10S
-
I have a set of T-Beam m8n devices with board revision `T22_V1.1 20210222`
all have been flashed to Meshtastic `2.3.4.ea61808 Beta` with the fully erase option
I have one of 4 devices that constan…
-
Hello,
I updated to latest version "2024.04.09" and noticed a couple of issue in the configuration.
I updated building and loading the firmware using VSC, then loaded the filesystem.
I had to corre…
-
### Category
Other
### Hardware
Not Applicable
### Firmware Version
2.3.12
### Description
UBlox M10x GPS module stays in aquisition mode (~12mA) and does not enter sleep mode (~50uA) if meshta…