-
hello, thank you kindly for this code and explanation.
I have a unitree A1 motor and an rs485 to usb adapter with output of GND, A+, B-.
could you tell me the pinout of the rs485 input on the driver…
-
I'm not a fan of ESP32's. But I love RPi Pico's. I havn't checked the pinout yet, so I'm asking if this board could be used with a Pico(W)?
-
In order to facilitate porting of apps and example across these two GateMate hardware platforms, ULX5M should strive to match Olimex pinout at FPGA level. With that, the GateMate gateware becomes plat…
-
Can you provide the Stemma QT Pinout?
-
Add support for TTGO T-Lite W5500 ESP32 Main Chip SSD1306 0.96 Inch Oled Type-c Usb Programming Development Board
Ethernet support is ready but pinout for TFT need to be documented and tested
-
XIAO S3 and Wroom S3 cam don't seem to work with edge impulse model. I get a heap corrupted reboot loop on both.
Both work fine with regular camera capture example, so the pinout doesn't seem to be t…
-
Could you please add a pinout diagram like for the other projects please?
-
There's an error in the schematic - the pins are swapped:
The symbol pinout is correct, but the wire lab…
urish updated
3 weeks ago
-
-
Hello friend, this can works in RAMPS 1.4 or only in Arduino MEGA?
Have the pinout Picture?