-
Output from both BLEKey and Proxmark3
[D7:95:10:9C:E0:5D] blekey>readcards
reading last cards...
0. 40 bit card: 0xfc28609024
1. 40 bit card: 0xfc28524ec8
2. 40 bit card: 0xfc28524ec8
[D7:95:10:9C:E0…
-
- [x] Update to correct LCCN's [dev]:
- [x] sn2016270204 should change to 2016270204 (pm1, pm2)
- [x] sn2016270206 should change to 2016270206 (pm1, pm2, pm3)
- [x] sn2016270207 should change…
-
**Describe the bug**
use command "lf hitag sniff"
go to reader with proxmark rdv4 via USB and token hitag S
token is accepted by reader
proxmark lights 2 red leds
trying to get log: "lf hitag lis…
-
Testing an unknown RFID/NFC tag shows it is ISO14443-B as reported by pm3 command "hf search". pm3 recommends further use of the "hf 14b" commands. "hf 14b info" does not provide any tag information d…
-
Jumpsquat animation length is decided by a character attribute rather than the animations length.
Bowser should have 6 frames instead of 7 https://rukaidata.com/PM3.6/Bowser/subactions/JumpSquat.html…
rukai updated
5 years ago
-
### Expected Behavior
I expect that when using JdkBlockingHttpClient the blocked call httpClient.send is used and not the asynchronous call httpClient.sendAsync. In this case, the entire request will…
-
It would be useful it the 200MHz clock generated inside enclustra_ax3_pm3_infra.vhd was connected as a top-level port.
A 200MHz clock is needed to as an input to the Input delay calibration block.
…
-
I noticed a few comments about me going missing, so I think I should state things more explicitly, and set expectations for you all.
**I've hit a wall with AndProx and PM3 development, so I'm not p…
-
Hi,
I've flashed LeTV with "DIYRuZ_FreePad_LeTV_PM3.hex", device is used with direct binding to bulb, 5-10 switchs per day, no more 2 weeks with new battery :/
I've 10 LeTV, all are same issue
…
-
I suppose the app needs to be upgraded. The screenshot eplains the isse.
![PM3_RFID_TOOLS](https://user-images.githubusercontent.com/9479876/198823269-0146f804-bcec-4e95-803c-15470819e4a5.jpg)