-
Hello,
I have got a small PCB board which has GPS(BN220) connected and it works fine
```
Second analog to digital sensor is not detected
Foreseen GPS type is Ublox (configured by oXs) :GPS i…
-
I'm interested if others have thoughts on this or a better understanding than I do. Please comment if so. In particular I think @jgonzal13 may have some work in progress on one or both of these topics…
-
## Expected Behavior
I expect the QGC to send commands to the currently selected drone.
## Current Behavior
Command is sent to all connected drones, I don't know what reply does it display.
Exam…
-
Please tell me if I should create this issue somewhere else.
I remember you controlled the LED with PWM driver in Linux.
Could you share the commands you used?
thanks!
-
-
### Wiki Search Terms
Axis setup, Testing movements, Testing enable motors.
### Controller Board
6x CNC Controller v1.2
### Machine Description
Gantry router XYZY, hardwired to DRV8825 drivers on…
-
Currently using ServoBlaster to control and configure the current light setting via PWM. Command the app to send the appropriate commands to `/dev/servoblaster` to change the lights.
-
If you have the time and would be willing to add this code we are going to try to improve our intake since we were not doing well with the current design.
So we are using our extra 6 hours to add a…
-
I propose adding two features to spindle_control.c:
1: Slowly ramp to pwm setpoint. Most PWM motor controllers will faithfully attempt to instantaneously start or stop a motor, causing massive curren…
-
Hello,
Does this modified firmware provide functionality to directly command motor rpm/pwm? I see that the mav_control_rw attitude controller publishes actuator commands. Is this implementable on r…