-
I am using the legacy function LMS_SetSampleRate(device, bandwidth, oversampling) on a 64-bit bookworm install on a LimeNET Micro 2.0 DE to generate a stream that is put into an fft and displayed. The…
-
My playback device's default is 192kHz, but testing suggests MilkDrop 3 beat detection maxes at 96kHz sample rate with my hardware. Is it possible to fix this for HD audio? Some modern (and expensive)…
-
My first time compiling and running dsf2flac (and, thank you for your effort in writing it!)
I am getting
```
$ dsf2flac -i 04.Pierrot.dsf
dsf2flac 0.1Rev54
Input file
04.Pierrot.dsf
Ou…
-
Looking through the Reference Manual for the STM32H7xx I see there is another Dual mode called Interleaved. It seems likely that by putting an input signal into two Analog Input pins (e.g. A0 and A1)…
-
Because the `Distortion` module does not have a `sample_rate` attribute, calling `.process_normalized()` fails:
```
42 denorm_param_dict = self.denormalize_param_dict(param_dict)
44 # n…
-
Hi here is the function I used for sampling at 860s/s.
`i2c = I2C(1,scl=Pin(15), sda=Pin(14), freq=400000)
ads = ads1x15.ADS1115(i2c, addr, gain)
def sample(adc = ads.read_rev, data=data, timesta…
-
Currently the display is refreshed all 125 ms. Some users want to have a real time level with lower display frequency.
Do we let the user select the window time of real time measurement ?
-
We've seen that reducing the sample rate from 2048 Hz to 512 Hz improves our sensitivity at lower masses. This opens up a few questions/experiments to run:
- [ ] What happens if we keep 2048 Hz sam…
-
Function [COREAUDIO_OpenDevice](https://github.com/libsdl-org/SDL/blob/SDL2/src/audio/coreaudio/SDL_coreaudio.m#L1050) has following code:
```cpp
AVAudioSession *session = [AVAudioSession sharedIn…
-
Hi,
I’m working with a 24-channel probe with 150 um spacing between contacts and a 40 kHz sampling rate. I have a few questions regarding the parameter adjustments for optimal performance:
dminx and…