-
When running `make env` from the root directory everything passes fine. Later if any of CMake scripts gets modified and a command `make ` is invoked CMake tires to re-generate related Makefiles. Then …
-
Hello KAWAZOME Ichiro,
I want to work with my project that i developped on quartus but, when I want to change .dts and .rbf, kernel doesn't work. I think i have to work with dtbocfg-ctrl but I don't …
-
Hi.
First, compliments on such a well structured and documented tutorial.
I have followed it exactly as given, built linux, SD card and the FPGA examples, and the blink example works fine.
But when…
-
Hello,
I have changed the device "LFE5U-12F" to "LFE5U-25F" in cynthion_r1_4.py, set the system variable LUNA_PLATFORM ="cynthion.gateware.platform:CynthionPlatformRev1D4", and have a dry run like…
-
It looks like it should be possible to get TinyGo running on an FPGA softcore without too much trouble.
I was reading this article earlier that describes using linker scripts for the HiFive1 and star…
-
## Steps to reproduce the issue
Build the microwatt soc. It is a mixed language implementation (vhdl and verilog), so you need ghdl and the ghdl plugin.
```
git clone http://github.com/antonbla…
-
*** Running vivado
with args -log vlsu.vds -m64 -product Vivado -mode batch -messageDb vivado.pb -notrace -source vlsu.tcl
****** Vivado v2018.1 (64-bit)
**** SW Build 2188600 on Wed Apr …
-
Hello! I was working in the FPGA - SDRAM Communication project. All was going fine up to the part of the U-boot programming.
In instruction # 4:
"""
Now we load the rbf file into memory and then …
-
Hello,
I am currently working with the "PolarFire SoC FPGA Icicle Kit". I have configured/flashed the device with the "Reference Design". Then, I have created an example test code (Simple LED Blin…
-
**Brief introduction of the Arrow Chameleon96 board (https://www.96boards.org/product/chameleon96/):
This board is a Cyclone V board (same chip as de10-nano) but FPGA was considered secondary and Nov…
somhi updated
3 years ago