-
ERROR: bme280:77:47: error: 'LMIC_f2sflt16' was not declared in this scope
uint16_t payloadHum = LMIC_f2sflt16(humidity);
ttn:113:57: error: 'os_init_ex' was not declared in this scope
…
-
Hi Roel, thanks for that great Software!!!
I've just running 2 TBeams here 24/7.
As the Frequencies are not standarized, the idea, is to implement a scanner function.
Means for a stationary RX to …
-
I'm running a T-Beam 1.1 433MHz. running T-BEAM V1.0 + OLED code.
When plugged into USB the installed 18650 battery gets slightly warm, I'm pretty sure that this indicates the battery is charging. …
-
I may just be blind, but I could not find out how to set to eu_868, it would always default to us and if you change the build_flags option in the platformio.ini it would just throw errors, so I found …
-
I have set eu868 configuration and tried to change to DR_SF12
-
Hi Rodem,
I recently ordered a TTGO T-Beam v1.1 (to get the same hardware as you) and what I received was a v1.2.
This new revision is currently not working with MicroNav. Error message says it …
-
![image](https://user-images.githubusercontent.com/18092613/195980910-7cb21fb5-8ef0-4cbf-84bf-4daa646133f6.png)
Battery tested at 4v freq change on via config doesn't work as initial value not set
…
-
Hi
after GPS fix, the time is set correctly ( UTC ) but the date remain to 31/12/1999 also after several hour .
could you please help me ?
thank you
73
-
Hi, I have a TTGO T22_V07 board and it's not receiving gps data. I'm running this [code](https://github.com/LilyGO/TTGO-T-Beam/blob/master/GPS/GPS.ino) in Arduino IDE. I already tried to upload with t…
-
I have a TTGO T-beam supreme but I cannot get a sketch working. After uploading it always displays:
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x15 (USB_UART_CHIP_RESET),boot:0x8 (SPI_FAST_FLAS…