-
### Do not report Prusa3D Slic3r bugs here without confirming it is a problem on a development release of Slic3r, or your issue will be closed. [Development builds of Slic3r](https://dl.slic3r.org/dev…
-
The assembly instructions indicate that it's possible to build a purge bucket with a brush holder using the materials provided in the kit. There're also custom files under STLs/PurgeBucket to accommod…
-
Hello. I am facing a problem - I have a laser (LS-40W-F23) which is controlled by TTL signal.
One of the options I have seen is to solder to the FAN1 pin going to the fan control mosfet, and by sett…
-
Hello, Perfect Mod
But what is the Prober Rotation Distance after upgrading to this mod since we are changing from normal T8 Leadscrew
-
As you know Bambulab introduced the Aux Fan for help cooling the material when printing at high speed.
The fork of their slicer, Orcaslicer, have this useful feature, it would be possible to add this…
-
The main difference between the standard flow and high flow dragon hotend is the addition of a ceramic sock that increases the length of the meltzone. To fit this in, without making the hotend longer,…
-
Line 172 of Kraken config has a typo: sstep_pin: PG11 instead of step_pin: PG11.
This caused klipper to error out.
-
https://vorondesign.com
ad-si updated
4 months ago
-
### Application Version
5.1.1
### Operating System
Windows 10
### Printer
Voron 0.1
### Reproduction steps
1. Open Cura, drag-and-drop an STL model
2. Click on the Material drop-down menu (tab…
-
Recently i bought the BTT SKR E3 mini V3 and a BTT mini 12864 V2.0 display
[https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v2.0](BTT mini 12864 V2.0). Not the best decision, but don…