-
The Power/Volume buttons worked perfectly with kernel version 5.9.13, but stopped working after the upgrade to 5.10.1
After updating the kernel from `5.9.13-surface` to `5.10.1-surface` via…
-
This issue is closely related to #42 , but is a separate and more controversial one. The idea is to implement a support for GroundedObjectNodes in addition to GroundedPredicate/Schema nodes. The idea …
-
Trying to enable both BeiDou and Glonass results in the following
```
$ /usr/local/bin/gpsctl -a -vv --satellites
Serial port ("/dev/serial0") open...
Serial port open and configured...
Automat…
-
#### Description:
I emailed a notebook that will form the foundation for a new chapter in the textbook. This notebook uses data from the CHAIN ground-based network of Global Navigation Satellite Sys…
-
I found that the GPS timestamp of point cloud coming out of HDL32e velodyne driver is different to actual GPS time (from other device like Applanix or Novatel GNSS system). I guess an EPOC change happ…
-
Hello，
Is there any paper about your work？ If yes, can you give me a URL or paper name?
Thkan you.
-
**Describe the bug**
If I disable the Wi-Fi AP mode service and afterwards I reboot my board, the virtual network interfaces on the USB connection are not properly setup (no IP addresses are set) and…
-
update required in : gps_run.c
GPS strings used to be in the format: $GPxxx (such as GPRMC)
But now they are: $Gxxxx (such as GPRMC, GNRMC, GARMC, GLRMC)
Ie. the second character defines wh…
-
Dear rodralez,
first of all, thank you very much for your work.
I am not sure if I miss something at the velocity update (vel_update.m), because there is a difference at the signs within the code …
-
It seems that the touchscreen functionality does not currently work for this newly-released laptop. I have built linux 4.15-rc4 with all available touchscreen-related drivers I could find in the kerne…