-
## Current Behavior
Currently RTH uses cruise throttle to bring home the plane
## Desired Behavior
An own setting for RTH throttle, or failsafe throttle
## Who does this impact? Who is this …
-
From https://discuss.ardupilot.org/t/rc-passthrough-on-soft-reboot/21342
Hi All,
A potential safety concern we've noticed is that RC controls are passed through directly to the motors when a reb…
-
Hi
I'm trying to build electronic equipment indoors.
Omnibus F4 Pro 1
Servos 2
ESC 1
sbus Receiver 1
How to set up the main motor to rotate without a gps r…
-
Issue trying on both INAV 2.6.1 and 3.0.1
I am trying to bench test my motors before installing in my fixed wing model however cannot get the red failsafe parachute icon to go away nor the orange a…
-
I want to try to build a wasm of mame0246 on ubuntu 22.04 according to https://docs.mamedev.org/initialsetup/compilingmame.html#emscripten-javascript-and-html. After I configured emscripten, I started…
-
## Steps to Reproduce
1. Setup: Matek F722-WING, Ghost atto duo receiver on 1.0.4.2
2. Everything works on Inav 2.6.1
3. Update to 3.0.0 or 3.0.1 with configurator 3.1, receiver is not working…
-
## Current Behavior
Matek M8Q-5883 magnetometer/GPS connected to MatekF411FC running iNav 3.0.0. BMP280 barometer connected in parallel with magnetometer on I2C pads. At powerup, everything works wel…
-
#### Issue details
I had some problem to have a GR16 working with Pixhawk and ArduPlane 3.7.1. It was OK with a GR12L, but not with a GR16.
I want to use a GR16, even more expensive, to be able …
-
### Board and Version
Board/Target: CLRACINGF4AIRV2
Inav Version: 1.8 but bug is older than that
### Behavior
Description: On a fixed wing aircraft, if I drop the throttle to zero (below min_ch…
-
**Describe the bug**
I found this issue during the tiltrotor flight test. After pre-arm button at GPS pixhawk 4 was pressed to disarm vehicle in fixed-wing mode, buzzer alarmed "long beep (arming ton…