-
I've been trying to use Fan Control and I've not been able to take control of the fans connected to the PWM fan headers on the motherboard which is not surprising since the Gigabyte X870E motherboards…
-
## Feature Description
Ability to power up/down chamber fan based on the temperature input from temp sensor.
## Justification
"Chamber fan is controller by gcode depending on the temperature …
-
RPi4 comes with a case + fan, and also a utility to configure this (temperature threshold, etc). Something like this in balenaOS would be nice so that one can use the official hardware from Pi foundat…
-
### Printer model
MK4
### Describe the enhancement
If my gcode uses layer-time dependent cooling or dynamic cooling, the gcode constant overrides my manual print fan speed changes. If there was the…
-
Model Alienware m16 R1 AMD 7845hx 4080
AlienFX main program isnt working fans get stuck to max rpm and program isnt starting.
Oh did i say it also broke my Windows :) getting constant errors fro…
-
Tested on both the ga-g41m-es2l and the ga-945gcm-s2l: The fan runs at a fixed level, no matter the system load.
ghost updated
1 month ago
-
V204 Win11 ASUS MB with Intel Gen 12 CPU and Radeon RX 580.
As soon as screen shuts off automatically under screen and sleep options all Fans go to about 50%. Wake up screen and all goes back to no…
-
Hi,
I have just added this to my HomeAssistant and it is mostly working and controlling my Daikin A/C ok however the controls for Fan Speed Mode and Fan Swing are not working.
My A/C is :
Daikin …
bf555 updated
5 hours ago
-
I have a very weird setup admittedly, so bear with me. My system uses a Commander Pro for 2 temp probes and controlling an EK D5 pump (set in fan port 6), and I use a Lian Li fan controller (which is …
-
**Environment**
State your AFC version : ( where is that , im assuming its the latest one )
OS version : Linux fedora 6.10.8-200.fc40.x86_64 #1 SMP PREEMPT_DYNAMIC Wed Sep 4 21:41:11 UTC 2024 x86_…