-
PIO Core Call Error: "UnknownEnvNamesError: Unknown environment names 'lpc1769'. Valid names are 'mks_eagle_usb_flash_drive_msc, mks_robin_nano_v3, STM32F103RC_ZM3E2_USB_maple, STM32F070CB_malyan, FYS…
-
How can I fix this bug in Marlin bugfix-2.x.x?
`Error: Unknown environment names 'MKS_ROBIN2'. Valid names are 'MightyBoard1280, MightyBoard2560, DUE_USB, DUE_archim_debug, STM32F070CB_malyan, maly…
-
### Is your feature request related to a problem? Please describe.
_No response_
### Are you looking for hardware support?
tmc5160 hv drivers
fysetc spider v2.2 board
### Describe the feature you…
-
Hi, it's been a week since I tried to configure these stepsticks. First, no connection to tmc (you need to put a jumper under the driver), now when it connects, I can not set sensorless homing. What …
-
Help needed.
I think I got all components assembled, but the display doesn’t light up.
![WhatsApp Image 2023-07-21 at 18 51 25](https://github.com/eamars/OpenTrickler-RP2040-Controller/assets/7120…
-
In the RRF readme (https://github.com/FYSETC/FYSETC-SPIDER/tree/main/firmware/RRF) in "Step4: config" , it says:
> There is config folder beside this README file, it is just an example config to ru…
-
According to this diagram, E2 heater is PC8:
https://github.com/FYSETC/FYSETC-S6/blob/main/hardware/V2.0/S6%20V2.0%20Postion.pdf
But in this diagram, PC8 is given as the bed heater output: https:/…
-
The configuration steps are outdated and misleading. Marlin 2.0.x implements the FYSETC variants natively.
There is no need to edit the `pins_RAMPS.h`.
In `configuration.h` search for **FYSETC_M…
-
When using Marlin, mks robin e3 board and a Fysetc mini display, the display does not automatically.change from the "Marlin" version screen. It gets stuck and needs a rotary button press. Then once bu…
-
Hello everybody,
i have a non-pro SKR V1.3 and FYSETC TMC2209 V2.1 stepper drivers, the board is flashed with the marlin fw.
All jumpers below the stepper drivers are removed, the UART Jumpers ar…