-
**Describe the bug**
unplugging an hexpansion with an eeprom during a read or write operation crashes the badge:
Hexpansion files: ['app.py']
Traceback (most recent call last):
File "main.py",…
-
schematics:
- make sure a new sequencing circuit is implemented (https://github.com/elhep/DIOT_temperature_logger)
- sequencing circuit controls SERVMOD pulldown line (power good signal)
- sequenci…
-
I'd add 24AA025E48T-I/OT assembly variant to it as well.
_Originally posted by @gkasprow in https://github.com/sinara-hw/Kasli-SOC/issues/69#issuecomment-1368025686_
-
I2C Eeprom stores MAC address. We have to implement gateware and software support to access the EEPROM.
-
#### Description
I am facing issue in detecting the transciever . If I provide the command **"show interfaces transceiver presence"** it does not detect . But if i provide the "sudo sfputil show pres…
-
Currently the software cannot use the gyro and ultrasonic eyes at the same time.
https://github.com/PetoiCamp/OpenCat/blob/902c3192224833202c429f59df9678b60d838989/OpenCat.ino#L55
Is this a sof…
-
sd card writing is expensive we can use raspberry pi header to write to an external eeprom.
Even the btt miniups is not even supported in klipper this would be a better way to add this feature.
-
**Question**
Hi, I want to put a mpu-6050 on the same bus of eeprom to using hardware i2c-0. I already soldered the giroscope on Tests Points on the lego ev3 board(SCL and SDA), but the eeprom uses…
-
After flashing your jetson-image using **`flash.sh`** , it successfully boots on the first attempt. However, subsequent attempts to boot fail. The initial boot is successful, but subsequent boots resu…
-
Quoth @quorten in #4:
> Just wanted to comment, I also really like the idea of an board variant with an RTC on it too. Probably the best way to do this is with a single AVR microcontroller on the …