-
Hi!
I'm the proud owner of a A4000D (with buster-11) and a BFG9060 (with a rev6 68060), which run stable at 100Mhz, also with Z3 cards (such as cybervision 64).
Lately I have purchased a reA4091…
-
I could integrate DRAMSys as per the example script in gem5 (SE simulation).
However, I am failing to do so for ARM O3 CPU FS simulation.
I am trying run with ddr4-example.json fil ein DRAMSys and…
-
latest build U-Boot 2013.04-rc2-geecdcf8
built with with nuc970_config
h/w nuc906dk61y
2750M008-ZZ2
constantly reboots in about 10-15 second while I'm staying in u-boot command line
NAND: no …
-
Be able to read the SPI flash...
* https://www.kernel.org/doc/Documentation/spi/
* Documentation/devicetree/bindings/spi/spi-bus.txt
* Documentation/devicetree/bindings/spi/spi-gpio.txt
* Do…
-
I get an error trying to synthesize mclwr1.v in Diamond 3.6 or 3.12:
documents/impl1/source/mclwr1.v(120): net rx_fifo_wr is constantly driven from multiple places at instance RX_FIFO, on port WrEn…
-
DBees updated
6 months ago
-
I have had great success in using `openFPGALoader` to burn a program to RAM on my Lattice MachXO2 board. However, when I try to burn to flash, it fails:
```
# openFPGALoader --busdev-num 000:005 --f…
-
In GitLab by @michael.dreher42 on Jul 17, 2020, 05:29
I already started to implement this, but I don't have the full information. Please see attached Libreoffice spreadsheet for the structure of the …
-
Hello!
I am a fan of 8-bit microcomputers and an electronics hobbyist. I have built for my own use a cable for Commodore 128 that allows to view images from C128 on TV screen in 80 column mode and …
-
I cannot upload firmware with Arduino IDE. It always show "Warning: No input file to program to flash". This is the full output log.
> [13:19:13.435] - Serial port is COM11
> [13:19:13.435] - ====…