-
### What happened?
Latest v14 works fine on Lolin D1 Mini v4, when I move to 15b4 I can't get the LED settings to work. I run 2 strips of 512 leds, using GPIO 2 and GPIO 1. I can configure and use on…
-
A blue-sky feature would be the ability to have multiple LED strips, so that I could create a scrolling vertical pattern, or scrolling text.
-
As soon as I enable this component in HA, the led strip starts flashing by briefly turning off and then on again within half a second or so. This happens around once per minut until I disable the plug…
-
Hi folks,
Just started with Pimatic and the rfcontroljs on my Raspberry Pi. Normal (KAKU) rf switches work but my RGB strip give issues.
As I saw in [this](https://github.com/pimatic/rfcontroljs/issu…
-
I am looking for the answer to the question, what type of LED strip is used for the HUE LED White and Color Ambiance Gradient. The original strip broke and I have the controller left, I would like to …
Ceda updated
8 months ago
-
### Is your feature request related to a problem? Please describe
GL-C-009P controller seems to not have support for 5 individual strips even though this functionality should be supported by the de…
seflm updated
2 weeks ago
-
- [x] missing ESD strips
- [x] missing DIOT power sequencing circuit
- [ ] move 0R resistors closer to EEM connector to minimize stubs
- [ ] get rid of ERC errors
- [ ] missing Power_Stage schemat…
-
I recently purchased what I didn't know was an eWelink powered LED strip. In Home Assistant, it only shows as a switch - on/off. This functionality works, but would it be possible to add the RGB + bri…
-
****
## Current Behavior
LED strip stops working when load mixer on on iFlight BLITZ F435 after flashing firmware and mixer load.
LED strip is Chimera7 side panels
## Steps to Reproduce
…
-
**Describe the bug**
When driving a strip of WS2812B LEDs from the IMXRT1040 SOC using the `WS2812_SPI` driver the first LED is not controlled
**To Reproduce**
Setup a board based on an IMXRT s…