-
I enabled the harmony plugin and executed a device search, then I get this error:
```
error [pimatic]: An uncaught exception occurred: Error: listen EADDRINUSE: address already in use :::61991
…
-
Steps to repoduce:
```
curl -X GET --user "user:wrongPassword" https://hostnameOrIP/api/devices/someDeviceId
```
This will raise the following exception (**sent via response body**, no log message!!…
-
## Expected Behavior
Hi any help is most welcome. Thanks
## Current Behavior
When using WIFI AC mode, any channel, the WIFI spot just disappears each time I do a speed test and the thro…
-
### Describe the bug
https://github.com/primefaces/primeng/issues/14373 ... basically this bug is back... see my comment at the end for current pictures ...note this is working in 17.16
### Envi…
-
I use Tailscale on one laptop which is often behind a restrictive network. To get access to my home network I had ran Tailscale on a Raspberry Pi at home advertising my home subnet. I needed to port…
-
## Describe the bug
In my setup, I have a Raspberry Pi (RPI) connected to an OpenThread Border Router (OTBR) via USB, along with a Thread device connected to the OpenThread network. After a period of…
-
All my devices are using DHCP with reservation in the Router, so in fact they are using static addresses. The DHCP router also contains hostnames for all devices. This information is read by Pi-Hole d…
-
### What is the issue?
This is about access inside my LAN. For testing, I have MagicDNS disabled, so this seems to be a routing problem, rather than a DNS problem.
Here's a simplified view of my t…
-
My reef-pi setup is very difficult to access on my local network. I chalked it up to my old router. But after replacing the router with ubiquiti I am still facing the same issue.
Most times when I…
-
### Preliminary Docs
I confirm that I have read the [CONTRIBUTING](https://github.com/ccrisan/motioneyeos/blob/master/.github/CONTRIBUTING.md) guide before opening this issue.
I confirm that I h…