-
Hi! I'm having an issue with using PEtab with Catalyst, and I think there's something going wrong in the residual calculation. I can set up the problem as in the docs, including with data taken from a…
-
Hey guys,
Before submitting to a pull request, I would like to suggest a small update to the `runIDFs` and `prepare_run` methods, both of which create/read the 'multi_runs' folder at `os.mkdir('mul…
-
### Discussed in https://github.com/ansys/pyedb/discussions/705
Originally posted by **SteffenSee92** August 1, 2024
Hi everyone,
I have a PCB layout in SIwave, where I performed an Induce…
-
Hello, dear colleagues!
I use lblrtm 12.16.
My running case consists of a user-defined temperature and humidity profiles and also cloud profiles (g/m3).
The gas profiles are set to the standard …
-
In the current code, it is possible only to read the weights once the simulation is completed. This is due to a check in Projection that the simulation "has_run". If the read is done between calling…
-
I'm working on development of the [rashdf](https://github.com/fema-ffrd/rashdf) library for reading [HEC-RAS](https://www.hec.usace.army.mil/software/hec-ras/) HDF5 data. A big part of the motivation …
-
**Description**
It seems like the last event(?) is not stored in the waveform output. (This is checked with both GTKWave and Surfer. From reading the VCD source, it is clear that nothing else can be …
-
-
Hello, sorry to bother you again. I am curious about how you implemented obstacle avoidance for suddenly appearing obstacles in your simulation. From our previous conversations, I have learned how to …
-
As a user, I would like to use the provided profiles (weather, demand, etc.) close to the ddcks that read them. At the moment, the path in the ddck can only be absolute or relative to the final .dck l…