-
- Operating System: macOS mojave (10.14)
- Python Version: 3.6.8
- Sonoff model: DM-581 (DIYMORE, see link below)
- Sonoff firmware version: 1.7.0
- I have read the README, and understand that Son…
-
I've got a dingtian 8 relay board and I'm using modbus over rs485 with a usb to rs485 converter. I'm able to switch the relays on and off with some success but they seem to change their state on their…
-
### Current Situation
I have been using a rPi running https://github.com/homebridge/homebridge-raspbian-image.
This rPi controls my garage door via the GPIO pins and a relay and detects if the door …
-
Project board: https://github.com/orgs/waku-org/projects/48/views/1
## Description
Design and implement a protocol that attaches RLN proof for messages received by light push services, enabling …
-
38M-49SMD-SR -> 8M-49SMD-SR
-
Hello,
I've set up this project, but only the LEDs on the relay board are activating, not the relays themselves.
The guide shows connecting the 5V and ground from the Uno board to the relay board.
…
-
T-Relay S3 supports up to 3 expansion boars to have up to 24 relays.
I'd like to ask for an example with an expansion board, so it will be easier for beginners (like me) to get started.
Also, do I…
Misiu updated
4 months ago
-
Devices as discovered in Home Assistant using ZHA:
TS0011 - _TZ3000_hhiodade - 1 gang
TS0012 - _TZ3000_18ejxno0 - 2 gang
TS0013 - _TZ3000_qewo8dlz - 3 gang
Pictures of the TS0012:
![image](ht…
-
Relay 2 does not turn off 9v pin on flight controller.
Assigned CH8 to relay 2. Verified relay 2 is associated to GPIO pin 81. Tried different relay default options with no change. iFlight …
-
Hi there.
I try to use the SCL pin to command a 5 V relay to stand and stop air assist. but when i power the board the SCL pin is High and the relay si on.
when i try the m7 command the relay is…