-
We need to allow the application to drive the RS-232 port. But not all the pins, just TX and RX with optional hardware handshaking on RTS/CTS.
-
La taille des paquets reçu par le MBED est limité.
Le constat est fait du durant la mise au point des échanges entre la Rapbserry et le MBED pour la redescende des informations Lidar (besoin initial …
-
Receive Flarm NMEA datastream on RS232 jack and merge these packets into outgoing NMEA datastream created by the LARUS sensor.
This would facilitate showing Flarm targets and Flarm warnings on connec…
-
Hello. I have already managed to build a simple graph using the wonderful ScottPlot library in WPF.
My goal is to plot a graph in real time from an RS232 device, please tell me which graph is right f…
-
Hi Frakkkkk!
I have read your code and it is great
I would like to make it work through RS232 because my Pylon are using RS485 interface to communicate with my inversor.
As far as I know Pylo…
-
It would be really nice to have an RS232 pak emulation that would connect to an IP and port address. That way I could use VCC to run terminal software or accept incoming connections without using a Dr…
-
Hey guys,
I am using cordovarduino, for my rs232 Barcode Scanner with a rs232 to usb adapter.
Now it works but it takes so long. For example when I scan a very simple Barcode it takes the ReadRe…
-
While looking into #201, I found a wrong serial number '5' reported for a FTDI 2232D which does not have a serial number (due to not having an external EEPROM fitted):
```
>cargo run --example lis…
-
Hi hope you dont mind me asking this question here. I was wondering if your code could be used with this RS232 to TTL adapter. I ask because I have a box of them, and I've used them with other vintage…
-
Hello I wanted to ask the code for Inverter voltronic Infini VII WP .... connected with the rs232-usb cable reads nothing and connects and disconnects ...I think it has the PI17 protocol ... I tried …