-
Is it possible to add support for servos to the SX1509 library?
Seems that the PWM functionality could do this.
Need 50 Hz pulses between 1.0 and 2.0 milliseconds.
As implemented by: https://www.…
-
**Describe the bug:**
In short `.\mach bootstrap` will fail when:
- On Windows
- using Python 3.13.0
probably similar to #34022
Due to the lack of version specification in readme, I opted for…
-
Probably overkill to add these as issues, and I would consider this VERY minor, but realizing that might be best way to track.
The tolerance on the base idle clamp (pictured) is too tight. When usi…
-
Hi there..
I have had some code working for a long time where I used a LILYGO SIM7000G unit connected to a DRV8871 motor driver through pins 32 and 33, and a servo connected to PIN 12. But suddenly…
-
### Guidelines
- [X] I checked for duplicate bug reports
- [X] I tried to find a way to reproduce the bug
### Version
Main (Production)
### What happened? What did you expect to happen?
Instead o…
-
- [ ] Implement basic functionality to control servo motors via PWM (Pulse Width Modulation) using Rust.
- [ ] Create a test suite to verify correct servo control.
- [ ] Handle errors from Maestro
-
I guess most of the users are smart enough to figure how does it work.
Apparently I'm not that one.
1. I haven't found any information about calibration or first setup of the servo. Happy Hare has…
-
Hello
come or give a lua script so that you can replace the "servo channel changer" because frSky is no longer selling it.
I have some "SBUS decoders" in use and my SCC is defective
-
https://github.com/servo/servo/blob/master/docs/components/style.md
These links no longer work:
http://doc.servo.org/style/selector_parser/trait.SelectorImplExt.html
http://doc.servo.org/style/…
-
if i want to set up the whole setup from scratch as described here in the git, the cmds:
>> ros2 launch xarm_moveit_servo lite6_moveit_servo_realmove.launch.py robot_ip:=192.168.1.xxx joystick_type…