-
I have a strange issue. When I connect the 18650 battery, screen goes blank however blue LED is on. I've tested if ESP32 getting 3.3v and confirmed that its getting 3.3v.
What could be the issue? …
-
Allo Loup et Jason,
Première ittération, juste pour le placement des affaires. Des commentaires?
Je sais que c'est pas encore le bon moment de faire ça, mais ça me tentait :-)
![design pcb ot…
-
Ok, Houston, we have a problem.
I order a second minilaser diode for fabmob but I was not please with the first one and I order the same used by bemaker this time. The machine is arrived, it's mou…
-
I have tested 4 Atom Lite with the deep-sleep sketch from the ESP32 library. I powered the modules directly with 3.3V and measured the power consumption in the 3.3V supply line. Nothing else was conne…
-
### Is your feature request related to a problem? Please describe.
I am trying to "go Fast," and my heavily modified Aquila can easily extrude nicely at 80-100MM/sec, but my acceleration on the last …
-
En gros, pour continuer sur le commentaire de Jason, est-ce qu'on y va pour full SMT ou full through hole?
Pour moi, ça se résume à:
SMT:
- Moins cher (il faudrait évaluer la différence en $ mais…
-
Is there any chance there could be a stage 4 to fix the bed being cantilevered? On a bed size this large, this is a _significant_ downside.
-
I got interested in using 4 of these on my homebuilt CNC and stumbled on this issue regarding using two motors on the same axis, in my case Y and A axis /reversed). I see no sign of this issue being h…
-
(This is a rough idea of the roles we need to run the project smoothly. Please DO leave feedback)
Legal Advice
===
Everything. We have to make sure it's all proper and nice. We might get under sc…
-
X-Max 3 Firmware 4.3.10
OrcaSlicer default X-max 3 profiles
I am using the older firmware because the newest 4.3.13 firmware does not work for my particular printer. The Z offset does not save cor…