-
i have ran into a problem with sp3 board. It won't start and flashes led with 4 long blinks. Where I can find a description for error codes? It was mentioned in 1.10 release, but searching through who…
-
Hi. I've already wrote about this issue in the forum and no, unluckly, I do not have a blackbox log but a video. I'm posting here just because a better analysis could maybe fix the issue and cause i'v…
-
- [x] Channel-to-channel cross-talk: adjacent channels, with agressor, victim switches opened and switches closed and with attenuators at max/min
- [x] Output phase noise/amplitude noise (0.1 Hz - 10…
-
I hope I don't sound unappreciative, but IMO the current sleep vs. shutdown logic is wrong and can/should be improved.
It would be both more intuitive and more useful if the behavior was:
```
if …
-
**Issue by [JSpringett](https://github.com/JSpringett)**
_Wednesday Nov 23, 2016 at 14:22 GMT_
_Originally opened as https://github.com/abersailbot/kitty-hardware/issues/9_
----
-
**Issue by [JSpringett](https://github.com/JSpringett)**
_Wednesday Nov 23, 2016 at 14:22 GMT_
_Originally opened as https://github.com/abersailbot/kitty-hardware/issues/9_
----
-
I came to realize that i2c timing is critical and since Arduino layer is on top os RTOS, interfacing with espressif IDF, depending on my code, it may be very difficult to maintain such i2c strict timi…
-
as this device is very cheap ~5$ and only need 2 pins and +/- hardware changes are not hard to implement, thank g mcclean for pointing this out.
connection can be done using UART0 non populated connec…
-
Add support for native FrSky telemetry (S.Port based X-Series receiver) using only a simple external inverter (i.e. https://github.com/TauLabs/TauLabs/wiki/User-Guide:-FrSKY-S.PORT-telemetry).
Somebod…
-
Picture shows it all. Text position is bad when display is flipped.