-
I need some help with some quality images team. Here is what I need
*The switch set to on, on the alamode so you can power both pi and alamode
*Someones alamode that has multiple flow meters setup o…
-
As work begins on the new chassis and electric component layouts we need to make sure all the wires in the wiring harness are labeled.
-
If we install all of the electronics (except for the battery) on removable boards (e.g., plexiglass), then the electronics can be assembled on a workbench before the mechanical work has been completed…
-
Create a formal wiring schematic in multisim and an assembly drawing of the robot wiring as well as updating robotmap.h to reflect all of the robot I/O.
-
All of the electronics on a robot (except for the battery) should be installed on a board pre-sized correctly to fit into the mechanical chassis, so that:
- the electrical components and wiring can be…
-
If we install all of the electronics (except for the battery) on removable boards (e.g., plexiglass), then the electronics can be assembled on a workbench before the mechanical work has been completed…
-
This is a catch-all issue for work related to getting the KVH driver interfacing with KVH devices over serial communications
-
If the pot pedal object is instantiated with two ADCs but you only have one throttle pot then bad things will happen as it will still try to use the second one. The code needs to look at calibration d…