-
where is the calibration tool ? How to generate the calibration table?
Lenet can not test the number correctly in VP.
the output.dimg is
0 0 0 0 0 0 0 0 0 0
0%.
Maybe the calibration tabl…
-
### Prerequisites
* [x] Device
Bosch Thermostat II RBSH-TRV0-ZB-EU
* [x] Device HA from Developer Tools on pure climate
```
hvac_modes: off, heat, auto
min_temp: 5
max_temp: 30
target…
-
This currently uses the original cstwMPC calibration code.
We should swap in the new HARK calibration code.
-
Hey, I just tried the exe and this resulted in the following error:
```
C:\Users\diederichbenedict\Downloads\gui-calibration-tool-v0.6_x64\gui-calibration-tool-v0.6_x64>gui_calibration_tool.exe
P…
-
| Required Info | |
|---------------------------------|------------------------------------------- |
| Camera M…
-
**Please describe the use case that requires this feature.**
For calculating the pedestal level (per sample), the charge median needs to be divided by the window width of the extractor. Since charge …
-
Hi all,
We have recently been trying to calibrate a stereo rig with 2 cameras + IMU using Kalibr. However, we have seen that, although the results are not horrible and are physically consistent (e.…
-
when I set both the ['calibration']['calculate']['extrinsics']['board'] to False, the Pose2Sim will show error,
![Uploading 微信截图_20241029155258.png…]()
-
We appreciate you go through Apollo documentations and search previous issues before creating an new one. If neither of the sources helped you with your issues, please report the issue using the follo…
-
The calibration documentation mentions that the data should be in rosbag format. Since early versions of Apollo were supporting ROS, it was fine. But the drivers in Apollo currently outputs as cyberRT…