-
### Description of the bug
1) after upgrading to 2.8 my physical printer profiles were all gone
2) when opening existing projects, they now do not map to my correct printer anymore but to a 3mf-spec…
-
Hi,
maybe you can help me. Im currently trying to run your image for my Elegoo Neptune 4, which uses a custom mainboard based on the skipr. The default image is working just fine but i'm missing on…
-
Firmware: 1.0.5beta
Currently the filament runout sensor only works for prints from SD card. Octoprint cannot detect runouts.
I don't know much about GCODE but it seems that the M115 command gets …
-
Anycubic and Elegoo released new 12K resin 3D printers several days ago. Whether this plugin support ultra [8K resin](https://www.sunlu.com/products/sunlu-red_wax-resin-1000g)?
-
### Cura Version
5.4.0
### Operating System
Windows 11
### Printer
Elegoo Neptune 3 Pro
### Reproduction steps
1. Install Printer with Profile "Elegoo Neptune 3 Pro" ==> uses prof…
-
### What happened?
The bed size for the Elegoo Neptune 2S printer is 1.5 cm two big in the X and Y directions (i.e. 235 mm instead of the 220 mm reported by the manufacturer). I understand that the p…
-
I am thinking of also controlling the stepper motor to control the Z stage of the printer but I don't think I can just connect the pins to the custom pcb and modify the python script to run it. Would …
-
Hi,
I see that in the official Klipper repo the config printer file contains this:
https://github.com/Klipper3d/klipper/blob/master/config/printer-elegoo-neptune3-pro-2023.cfg#L28
instead in yo…
-
Hello,
There are 2 Printer.cfg for the N3Pro, which one should you prefer and what are the differences? Thanks
-
### Cura Version
5.7.0
### Operating System
Windows 10
### Printer
Elegoo Neptune 3 Pro
### Reproduction steps
Open project file, slice it and preview layer 6.
### Actual results
Some circles…
T3rm1 updated
2 months ago