-
#### Brief description of the issue
Minerals obtained via mining need to go toward manufacturing. Manufacturing will mostly replace the Science department. However, we need to discuss what exactly ge…
-
-
With the Supermicro X11 and X10 motherboards you have to set a jumper on the motherboard to flash the ME region via the AFU* utilities. This is called the manufacturing mode, sometimes recovery mode.
…
-
HT3 is hardware testing phase that is conducted by the hardware vendor. Details are discussed in the [Sayma v2 hardware contract](https://github.com/sinara-hw/Sayma_AMC/wiki/Sayma-v2-contracts). TS2 …
-
Meet with Musa and understand how to kick-off the project. Handoff will need to be done before August 1 2015
-
1. PC 加硬镀膜
2. Reduce costs
3. 找一家备选
除了TL, 没有备选
-
- Mounting plate extends too far up. Also expensive: JLCPCB charged $30 for 5
- Long keycaps don't fit
- USB connectors should be sideways so they can be tested without breaking them apart. Alignmen…
-
Launch Control (DISCO_IN) doesn't work.
This is a pulldown Switch to GND and for this feature going to work you need to switch R20 and R29 on the PCB.
R20 10K --> 1K
R29 1K --> 10K
Will be chang…
-
**JOB WORK INWARD**
**What?**
In the manufacturing industry, "Job Work Inward" refers to a process where a manufacturing unit undertakes the production or processing of semi-finished or finished g…
-
@marmeladapk When we spoke on 11/27 you said:
- Metlino (qty 4) are stuffed but not yet tested. What is status of testing?
- Metlino-MCH Riser card is on hand. Do you have four of them?
- Front pa…