-
# uAvionix Ping USB support
## Setup
1. Stratux version: Stratux 1.6r1-eu029 by b3nn0 (EU)
2. Stratux config:
SDR
- [X] single using uAvionix Ping USB via USB
- [ ] dual
…
-
Stopping CDev (unregistering character driver) while MAVlink is using it, leads to Hardfault.
I'm working with NuttX, I don't know if this relates to other platforms. Please check it.
Steps to re…
-
Hi Everyone,
I’ve been trying without success to connect with a simple dronekit-python script to my drone running **navio2+rp3** and Arducopter. Connection to the drone works perfectly with both **…
-
```
Line 888 added return; See discussion
http://diydrones.com/forum/topics/connection-error-in-apm-mission-planner-with-w
ireless-telem?xg_source=msg_com_forum&id=705844%3ATopic%3A831677&page=4#
```…
-
### Issue details
The `mavros-uas-test` and `mavros-router-test` crash with segfault:
```
$ ./mavros-uas-test
[==========] Running 2 tests from 1 test suite.
[----------] Global test environme…
-
Start QGC and connect px4 board by wire. In nsh console type `mavlink status`: rx loss percentage will be not zero (in different scenarios it could achieved 95%+), while everything is working normal.
…
-
Hi,
I've been working to install this repository and everything has gone well up until the point of installing the modified MAVROS node. I've been able to install the RotorS simulation as well as t…
-
Hello all,
I am running arduplane 4.1.X with dronekit 2.9.2 and pymavlink 2.4.4. When I run the SITL sim_vehicle.py and connect the vehicle_state.py example code every thing works as it should…
-
```
Line 888 added return; See discussion
http://diydrones.com/forum/topics/connection-error-in-apm-mission-planner-with-w
ireless-telem?xg_source=msg_com_forum&id=705844%3ATopic%3A831677&page=4#
```…
-
```
Line 888 added return; See discussion
http://diydrones.com/forum/topics/connection-error-in-apm-mission-planner-with-w
ireless-telem?xg_source=msg_com_forum&id=705844%3ATopic%3A831677&page=4#
```…