-
what UI or sender shall be used for embroidery mode?
Thanks
-
Hi,
I working on a project using the OpenBuilds C-Beam linear actuator with a NEMA 23 driven by a BigTree TMC2130 V3.0 Stepper and controlled by an Arduino MEGA2560.
SPI communication works we…
-
Hi Strooom
This issue
https://forums.autodesk.com/t5/fusion-360-computer-aided/contour-takes-off-on-tangent-g03-but-not-on-similar-pocket/m-p/7641509/highlight/false#M41174
is my fault because you …
-
I flashed the BB 32 firmware with a build generated through [http://svn.io-engineering.com:8080/?driver=ESP32&board=BlackBox X32](http://svn.io-engineering.com:8080/?driver=ESP32&board=BlackBox%20X32)…
-
I couldn't find the required settings to configure jscut for laser cutting along the path instead of outside the path.
-
hi dear György Kovács
and thanks for your nice code!
a question!
why file name must have 8 capitalized char ?
is there any way to solve this Limitations?
as far as i know sd cards dos not have th…
-
- [x] Parts Required
- [x] Assembly
- [ ] Firmware
- [ ] Сalibration
- [ ] Printing
-
## Issue Title
uCNC (https://github.com/Paciente8159/uCNC) controllers cannot connect flashed on an Arduino mega
Same for firmware grbl-mega
Running master (c3233c29aca89e89b48b92067dff5f67f33a1…
-
### Controller Board
Custom Esp32 board with TMC_2009 as standard_stepper (no uart)
![grbl32_pins](https://user-images.githubusercontent.com/3391893/179852304-e93dbc5e-1a29-4280-b959-cffae0232409.…
-
Context
-------
Notre laser
Wavelength 400-460nm
class IV laser product
this product is comply with 21 cfr
![img_2666](https://user-images.githubusercontent.com/31619215/44545832-65923580-a71…