-
We found that SBUS communication does not work with Futaba Receivers. We were able to track the issue down to the end byte. FrSky receivers use 0x00 as the end byte and this is how the code is setup c…
-
Hi!
I am trying to connect Lite 2.0 FC (beta65s lite) with xboss rx2a pro receiver. As i read in manual, i just need to solder sbus input to rx pad, power up FC with pressed button, and after power u…
-
it seems that i cant compile for Leonardo/Micro based on 32u4.
i get errors:
```
C:\...\libraries\sbus-master\sbus.cpp:104:5: error: 'TCNT2' was not declared in this scope
TCNT2 = 0;
…
-
### Is there an existing issue for this problem?
- [X] I have searched the existing issues
### What part of EdgeTX is the focus of this bug?
Transmitter firmware
### Current Behavior
I have a X9E…
-
I am using the conda environment mentioned in the [Chipyard documentation.](https://chipyard.readthedocs.io/en/latest/Chipyard-Basics/Initial-Repo-Setup.html) When I run `make -C rocket run`, it finis…
-
-
SBUS uses an even parity bit. Is it actually being used with current NuttX?
* https://github.com/uzh-rpg/rpg_quadrotor_control/wiki/SBUS-Protocol
* https://github.com/PX4/Firmware/blob/master/src/l…
dagar updated
2 years ago
-
Hello,
The idea here is to use the FrameLost status contained in the SBUS protocol to give an indication of the signal quality of the RC receiver, and use it instead of the analog based RSSI in all t…
-
Dear sebseb7,
I couldn't find another way to contact you so I am contacting you like this.
I have the purchased the [SBUS to PPM decoder](https://www.aliexpress.com/item/RCTimer-Tiny-Converter-S…
-
Not sure if this is a hardware limitation but if we could get a software toggle to switch to uninverted sbus on the UART for the TX16S that would be awesome. This would allow users to use radiomaster …