-
Hello Vojtech,
It has been many years but I was hoping you might be able to lend a hand. We (Multus SDR, LLC - https://www.multus-sdr.com/) are still plugging away with designing and producing tr…
-
In OrionBoardConfig.h the defined parameters WSPR_CTC and SI5351_CAL_TARGET_FREQ should
have their values set automatically based on the value of F_CPU (defined within the Arduino Board
definition …
-
Code won't compile in Arduino IDE with the following errors:
C:\Users\adaml\Desktop\trackuino-tracker-master\trackuino\afsk.cpp: In function 'void afsk_setup()':
C:\Users\adaml\Desktop\trackuino-t…
-
I'm using this library with a 4351b, 27Mhz Xtal and it seems to work well.
However I would like to see what LOS and REVID actually mean. in my case they always show 1
'indicating some kind of erro…
-
I installed a clock generator as described on this page:
https://github.com/ramapcsx2/gbs-control/wiki/Si5351-Clock-Generator-install-notes
on both a gbs-8200 and gbs-8220, it works fine on th…
-
heres the sketch followed by the error messages,can anyone tell me how to fix it?,cheers.cant paste the code so heres a link,im using ver 2.8 inch tft3.5 touchscreen link:https://www.youtube.com/redir…
-
Dear Roman,
I have analyzed your code with interest. It looks like your method share similarities to Time-Average-Frequency Direct Period Synthesis (TAF-DPS). I read about [TAF method in wikipedia](h…
-
Not only that it defaults to the hardware modified version, most people like me took time to figure this out. 2nd where are the hardware things I need to do to use the improved option?
-
Hi , I am integrating Si5351Arduino on an ESP32 micro using arduino IDE.
I get erratic behaveures when using the set_freq and set_freq_manual methods; in particular:
1) the status is always as follo…
-
I have used the exact same board on three arcade boards. I am using an ESP8266 with an Si5351 on board. The board works great on one arcade board and my Amigas but two arcade boards are not.
One is o…