-
Here's a coherent project plan for Sayma v2. It is informed by extensive discussion on github Issue system over the past year and recent offline discussion with the Sayma v1 developers. This is posted…
-
_From @hartytp on November 30, 2017 5:36_
Thanks for producing the really nice Nanoga schematic. Basically looks really good! I've completed my review. Comments are below and in other issues under th…
-
How to detect from the AMC that the RTM is being unplugged/re-plugged?
Now that the AMC-RTM link is using DRTIO, we can support RTM hotplug without a lot of trouble; we just need to reload the RTM FP…
-
Depends on the final conclusions of https://github.com/sinara-hw/meta/issues/64.
There are several points to consider:
1. Establish front panel circuit and connect mounting holes to it.
1. Powe…
-
- Multiple Sayma cards in R5 crate (crate power turned off)
- NAT MCH
- All AMCs have inserted hotswap
When turning on crate power, MCH boots up and grants payload power to 1-2 boards (always in …
-
![2021-06-02 20 04 41](https://user-images.githubusercontent.com/4325054/120891923-8d26c400-c60b-11eb-86d6-54be43bfec21.jpg)
-
## Unused/ floating resources
- [x] IC23A missing from schematic, set as a GND follower to keep from floating
- [x] IC27B missing from schematic, used later in this issue
- [x] IC26C missing from…
-
From @gkasprow
> Btw, the 3U PSU is under development. One can see some drawings [here](https://viewer.autodesk.com/id/dXJuOmFkc2sub2JqZWN0czpvcy5vYmplY3Q6YTM2MHZpZXdlci90NjM3MTMyMTY5NDI3NjA3MzM4X…
-
Initial specificacion:
Design based on CUTE-A7 and fully software compatible
- FPGA copied with pinouts from CUTE-A7
- 6-layer stack up
- Power supply copied from KASLI-DIOT
- SMA connectors: …
-
**Describe the problem you have/What new integration you would like**
I live in a very crowded environment - the 2.4GHz network is very unreliable (over 100 wifi networks). 5G is working fine but…