-
How to run rigctld so that it does not erase TONE CTCSS while transmitting.
Example:
ISS GPREDICT
145.990 MHz / CTCSS: 67 Hz – (Uplink VHF)
437.800 MHz – (Downlink UHF)
When I set the tone cc…
-
Hi,
Thanks for publishing these keybinds so fast!
I've noted a problem with the push/pull toggle for each of the radios.
Using the bindings in this screenshot it will PULL, but will never do th…
-
Would it be possible to add more bandwidth values and show the exact number?
For example, others fw allow to choose between 5 / 6.25 / 8.33 / 12.5 / 25 KHz
Where 25 and 12.5 are the usual bandwidt…
-
I would like to see a way of reducing the audio level of the audio going to my Broadcastify feed. Right now it is way too high and sometimes clipping. Also a way of adjusting the low and high pass aud…
-
Hi All,
I follow the steps from [CFU virtual HID device firmware update simulation](https://docs.microsoft.com/en-us/windows-hardware/drivers/cfu/cfu-firmware-update-simulation) and create a virtua…
-
忘れないようにメモ
https://github.com/vhf/free-programming-books/blob/master/free-programming-books-ja.md#ruby
-
We need complete loadouts for the DSE, Xenos and Navy ships that will be floating around the Colorado system. This includes the following:
- Rookie, Pilot, Veteran, Elite and Ace
- For LF, HF and VHF…
-
selecting lower samplerates in VHF should automatically reduce the R820T-tuners' IF bandwidth - to avoid oversteering of ADC
-
* created by @BlueFinBima on 2018-08-05 14:00:17 +0000 UTC
* assignees: Phar71, damien022
This is a basic interface for the Mirage 2000
## Comments:
### comment by @BlueFinBima on 2018-08-05 17:49:…
-
Matt Removed 53.150 W0YC/R off of St. Paul Campus on June 6, 2021 and used the feedline for 443.000/147.750 receiver site.
- [x] Order or build a Henry or similar amplifier for 6M.
- [x] Check th…