-
### Bug Description
Upon uploading firmware that has been modified to enable dual extrusion, Ender 3 will not boot correctly but gets stuck in a loop, showing the boot screens every 10 seconds.
…
-
Hi there new to marlin and working with a MKS Gen 1.4 and been doing good on it, Got it all working and I noticed after testing the hotend and heatbed for stability for an hour, I looked at the LCD an…
-
### Version
1.35.1
### Operating system type + version
Mac OS X 10.12.1
### Behavior
* When using any infill modes 'Triangles','Stars' and 'Cubic' on a 30mm wide cylinder the infill goes in…
-
Hi,
There appears to be an issue when using mapbox extrusions which cause the browser to crash on iOS mobile devices.
After a short period (generally not more than a couple of minutes) of navigati…
-
Hi all,
I've written a little extrusion program for a mesh, which works by extruding boundary faces. I know there is a way to get the number of boundary elements of a mesh (`mesh->GetNBE()`), but i…
izaid updated
4 years ago
-
### Bug Report
I'm using Marlin v1.1.6 with RAMPS 1.4 with full graphic Smart Controller. I've changed from a thermistor to a thermocouple K-type using a MAX6675. I've changed the sensor type to -2 i…
-
on uncomment #define CNC_COORDINATE_SYSTEMS in config h adv
```
In file included from sketch\src\Marlin.cpp:49:0:
sketch\src\gcode/gcode.h:400:10: error: 'bool GcodeSuite::select_coordinate_s…
-
Printer type: MK3
Printer firmware version: 3.9.0 vs 3.8.1
SD card
Upgrades: BMG extruder variant, Vesconite bearings, cable chains
I've seen a significant decrease in quality after moving to 3.…
-
hi to all
am i using a cyclops extruder with two stepper motor that they push the two filaments in to the cyclops extruder.
the problems are:
1)if i set 2 extruder with single nozzle function,it'…
-
Jeff Jiggens suggested I share a calibration process I have been working on and might want to integrate into your slicer.
https://github.com/prahjister/Calibration-Generator
I am preferring to g…