-
Hello, I have been testing the C6SmoothBump, Ricker, and Gaussian STF, keeping all other source parameters constant:
**source type=C6SmoothBump depth=3000 lat=-41.21 lon=175.01 strike=336 dip=63 rake…
-
Hi,
Thanks for your sharing.
1. For impedance:
`_step() -> _step_continuous() -> _setup_action() -> _do_simulation()`
In _setup_action(), it just setup gripper part action, rescale and set gravi…
-
The scroll motions during the ~50ms in the middle of a fast fling motion on iOS is not accurate.
In the middle of the fling itself (and generally), the scrollable's position offset follows the fin…
xster updated
7 months ago
-
KCribbage is pretty hard to parse. Ideas:
1. Show the crib -- 'empty' slots before discard, card backs afterwards
2. Put the deck in the middle of the board, next to the play area
3. Add numer…
-
For the pages like `/ex-commands`, `/getting-started` & `/motions`, instead of duplicating pages and markup, I wonder if we could use a data file with a structure something like:
``` yaml
url: "ex-co…
-
Right now OpenRAVE can (and will) use exact size of the CAD model of the wrist when it plans, resulting in motions that move the wrist along the edge of the table. I've had to E-Stop a few times as th…
-
I noticed the pen position after the plot completes, and if it's paused or stopped, it's very erratic.
The most annoying part is that it's never possible to know if the state of the pen position i…
-
Hi, the model is very accurate for face shapes.
However, it seems to have only 10 parameters for expressions.
Eyes' and eyebrows' motions are not well detected. Expressions for mouth are good.
Ho…
-
Recently I have noticed that some IOC's are not being classified into an Output miner.
The logs show that the IOC is going through the motions and should eventually be added to the HighConfRed Outpu…
-
Hello, I was wondering if it was possible, on the noetic version of sbpl_lattice_planner, to have a different number of primitives per angle. For example, 7 primitives for angle 0, and 11 primitives f…