-
After flashing INAV 2.5 RC1 with full erase and factory reset on Holybro Kakute F7 Mini version 1 with K7 ;
I get a CPU overflow if i set the Looptime to 4k or 8k.
Tasks in Cli: 1 - GYRO/PI…
-
## Current Behavior
Presets "Airplane" and "Airplane with differential Thrust" seem identical, and both map S1 and S2 outputs to motors. This is an issue for me and, I suspect, everyone who uses flig…
-
## Current Behavior
In the **smix** **"Speed (10μs/s)"** column, a value for servo speed can be specified for a given mixer rule.
Currently, this seems to work only when for the very first time af…
-
Pitch and roll board align constantly drift. Affects flying in navigation modes. I have replaced the board and adjusted the acc ignore feature. Gyro reads correctly and updates quickly when plane is m…
-
**Describe the bug**
This is a vtol plane I flew for about 15+ flights.
1. The FC is a hex cube.
1. Firmware version is derived from 1.8.1 stable, RTK gps driver is modified.
1. Before this crash …
-
### Application error
#### System
| | |
|------------ | -------------|
|Platform | win32 10.0.19042 |
|Architecture | x64 |
|Application Version | 1.4.9 |
|Process | renderer |
#### Message
Failed in…
-
#### If this is a feature request describe it here
FEATURE_REQUEST_DESCRIPTION_GOES_HERE
#### Version of Octolapse
Octolapse Version: 0.3.4
#### Version of OctoPrint
OctoPrin…
-
**Describe the bug**
There appear to be timing issues between the Spektrum SPM4648 in SPECTRUM1048 mode, and the F722-WING, under all tested versions of firmware, when using DX6i (or other SPEK1024 o…
-
### Bug report
**Issue details
All rc failsafes, and throttle failsafe do not function. Throttle apparently is forced to neutral internally on SBUS RC failsafe and/or throttle failsafe since veh…
-
## Current Behavior
When trying to setup LEDs, enabling wiring order mode does not allow me to number the "boxes". They just stay blank (highlighted purple though)
## Steps to Reproduce
1. Enab…